The Vilter S pod is made of PCTG.
The device’s main material is Aluminum alloy.
No, the coil is non-replaceable.
No, it is not power regulated.
The Vilter S has a Type-C port and its maximum charging current is 500 mA.
Yes, the Vilter S is activated either by auto-draw or by button triggered.
1) Remove the pod from the device;
2) Lift the plastic seal and add e-liquid through the filling hole;
3) Close the plastic seal firmly and put the pod back.
The capacity is 500 mAh.
The wire of the 1.0 ohm mesh coil is made of Kanthal AF.
The coil resistance is 1.0 ohm with wattage of 10-15W.
The screen will display “LOW BATTERY” to remind you to charge your Vilter S.