FAQ Center

1. Remove the podfrom the device;
2. Pull the side silicone seal;
3. Fill the e-liquid into the poddirectly and close the silicone seal;
4. Put the podinto the groove joint of the

Note: In order to let the e-liquid fully saturate through the coil and avoid a burnt coil, wait 5 minutes after filling before using.

Yes, the Cyber G could be activated either by auto-draw or by a button triggered.

Charge the Cyber G through the Type-C port, the maximum charging current is 1A.

The Cyber G device is mainly made of aluminum alloy.

The Cyber G pod is made of PCTG.

1.0Ω and 0.8Ω mesh coils.

The Cyber G comes with an 850 mAh built-in battery capacity.

The standard version of Cyber G weighs 42g.

The TPD version of Cyber G weighs 40.5g.

Φ19.5 * 122 mm (Standard version)

Φ19.5 * 114 mm (TPD version)

No, it is not adjustable.

The LED light will flash red 15 times to indicate that you need to charge the Cyber G.

When the Cyber G is fully charged, the LED will flash green 20 times and the battery will stop charging automatically.