Warning: This product contains nicotine. Nicotine is an addictive chemical. For ADULT use only.
Fluffi Series Proteus Series Pixo Series Cloudflask Series Gotek Series Minican Series Rover Series Veynom Series Revolto Series Boxxer Series Nexi Series Huracan Series RAGA Series BP Series Cyber Series Vilter Series Riil Series R1 Series Flexus Series Atlantis Series Rhea Series Zelos Series PockeX Series Nautilus Series Favostix Series
Pod System Vape Kit Vape Tank Vape Mod
Home FAQ Center Vape Mod

FAQ Center

Vape Pod
Pixo Cloudflask X Gotek Nano Minican 4+ Veynom Air AVP AIO BP Stik Breeze NXT Breeze 2 Breeze Cyber X Cyber G Slim Cyber S Cyber G Cobble Flexus Pro Flexus Fit Flexus Q Fluffi Flexus Blok Flexus Stik Gotek X II Minican 4 Minican 3 Pro Minican 3 Minican 2 Mulus RBA Mynus Nautilus AIO R1 Plus Riil X Vilter 2 Vilter Pro Vilter S Vilter
Vape Kit
Rover Plus Revolto Boxxer AVP Pro Flexus AIO Flexus Peak Favostix Gotek Pro Gotek S Gotek X Minican AVP CUBE Aspire Zelos 3 Aspire Tekno Aspire Slym Kit Aspire Tigon AIO Aspire SLX Aspire Rover 2 Kit Aspire OBY Aspire Mulus Kit Aspire MIXX Aspire K Lite Kit Aspire Deco Kit Aspire Cloudflask Aspire BP80 Aspire BP60 BOXX Kit Cloudflask III Cygnet Revvo kit Cloudflask S Finixx Huracan LX Feedlink Revvo kit Huracan EX Veynom LX Veynom EX Proteus Neo Zero.G Vrod 200 Typhon Tigon kit Spryte AIO Rhea Reax Mini Kit Puxos PockeX Box Onixx Neeko RTA Nautilus Prime X Nautilus Prime Nautilus GT Kit Minican+ K4 Kit K3 Kit K2 Kit K1 Stealth Kit PockeX Rhea X Nautilus 2
Vape Tank
9th tank Atlantis EVO Athos tank Aspire Odan tank Atlantis GT Cleito Pro Cleito 120 Pro Cleito Shot Tank Huracan Mini Huracan Kumo RDTA Nautilus 3S Nautilus 2S Revvo
Vape Mod
Dynamo NX75 Mod NX30 Paradox Speeder 200W Mod Vilter-PB Zelos X Zelos
Accessories
Degerm Sterilizer

Vape Mod

Here you can find answers to most frequently asked questions about Vape Mod

How to charge the Aspire Speeder 200W Mod?

  • Charging the Speeder via Micro-USB charging port, the maximum current can reach up to 2A.
  • Connect your Speeder mod to the charger and the screen will display a flashing battery icon as well as battery voltage level, charge current and charge time. When the battery charge reaches 4.2V or is fully charged, the mod will stop charging and the screen will remain off.
  • The batteries can not be replaced while charging. Please unplug the USB cable before changing your batteries.
  • When the battery charge drops below 1.5V or battery incorrectly installed the mod will stop charging.
  • When the mod detects the USB charge voltage is less than 4.3V, it will stop charging and the screen will display “CHECK CHARGER”.
  • To accomplish 2A charge current, the adaptor output should be 5V/2A.

 

How to use CPS(Customizable Power Settings) Mode?

  1. Pressing fire button and “+” button simultaneously for 0.5 second will allow you to select between Wattage, Voltage, Bypass, CPS(C1/C2/C3), TC(Ni/Ti/SS316L) and TCR(M1/M2/M3). Pressing “+” or “- ” button to select modes, fire button to select/confirm.
  2. When the mod is in CPS(Customizable Power Settings), pressing “+” and “-” buttons simultaneously will allow you to fine-tune your heat ramp-up (power curve). Pressing “+” or “-” button to change wattage, fire button to select time from 1 to 15 seconds, pressing “+” and “-” buttons simultaneously again will exit your Customizable Power Settings.

 

Why do i get “Check Charger” message from my Speeder 200W Mod?

  • When the mod detects the USB charge voltage is less than 4.3V, it will stop charging and the screen will display “CHECK CHARGER”.
  • For safe charging, we suggest using the provided Aspire USB charger to charge your mod.

 

How to update the new Firmware for Speeder 200W?

  • Download the driver software from Aspire website: https://www.aspirecig.com/upgrade/
  • Connect the Speeder to your PC. The driver will detect your mod automatically.
  • Click “OpenFile” to choose the correct firmware file.
  • Click “Update” to upgrade your mod.
  • If it failed during the update process please repeat step 3 to step 4.

 

How to adjust my continuous fire time on Speeder mod?

The pre-set contiuous fire time is 10S, pressing the fire button for 10 seconds to adjust the continuous fire time from 5S to 15S. Click Up and Down button to select numbers, fire button to confirm.


 

Can I replace the batteries while charging my Speeder?

No, batteries can not be replaced while charging. Please unplug the USB cable before changing your batteries.


 

How to turn on/off my Speeder mod?

  1. The mod will automatically turn on after installing battery.
  2. Click the fire button 5 times rapidly to turn your speeder on.
  3. When the mod is locked, Pressing the fire button for 3 seconds to turn it off.

 

How to lock/Unlock my Speeder mod?

Click the fire button 5 times rapidly to lock or unlock your mod.


 
345…12