Here you can find answers to most frequently asked questions about Zero.G
Does the Zero.G support temperature control?
No, it does not support temperature control.
Which coil is compatible with the Zero.G pod?
Both AVP Pro coils and Zero.G RBA deck are compatible with the Zero.G pod.
What is the Zero.G pod material?
The yellow tube is made of PEI and the metallic parts are made of Stainless Steel.
How do I fill the Zero.G pod?
1) Pull and remove the pod from the main body;
2) Invert the pod, lift the silicone seal and add e-liquid through the filling hole;
3) Insert the pod back onto the device.
How much does the Zero.G weigh?
The net weight of Zero.G device is 132 g.
How to install AVP Pro coils in Zero.G pod?
Pull and remove the pod from the power unit;
Invert the pod and replace the used coil with a new one (you can pull out the coil with the provided tool or you can manually pull it out);
Insert/secure the pod back.
Note: we suggest you empty the pod or keep just a small amount of e-liquid in it before you change the coil.
How do I build the Zero.G RBA?
Unscrew to remove the RBA chamber;
Put the prebuilt coil on the build deck correctly. Screw the grub screws down and tighten the coil. Snip off the coil leads and install the cotton wick;
Screw the RBA chamber back onto the deck, then remove the RBA 510 adaptor;
Unscrew to remove the preinstalled base (use the base hardware replacement tool);
Insert the RBA into the pod and screw it (use the base hardware replacement tool).
Note: A prebuilt RBA coil and cotton wicks are not included in the package.
Can I use any other 510 tanks with the Zero.G mod?
Yes, you can use other 510 tanks with the 510 adaptor. The Zero.G 510 adaptor is not included in the kit; you need to purchase it separately. The max wattage that Zero.G mod supports is 40W.
