When the device is on, press the fire button, the indicator light will indicate your device’s current charge. When its current charge capacity is above 3.8 volts the indicator light will be green. When the charge is between 3.5 and 3.8 volts the light will be blue only. When the charge drops below 3.5 volts the light will then turn red.
The Reax mini has automatic cut off function. The preset continuous fire time is 10 seconds, after 10 seconds of continuous firing, the indicator light will flash pink 10 times and the device will stop firing. Please release fire button to let the device have a break, then you can continue to use the device to vape
Press the mode button to adjust the output wattage, the bottom wattage display will light the corresponding output power value:
8W, 10W, 12W, 14W, 16W, bypass.
Note: The output wattage can only be adjusted when the resistance of the connected coil is detected to be equal to, or higher than 1.0Ω; when the coil resistance is less than 1.0Ω, the output mode is automatically in bypass mode therefore cannot be adjusted.