Warning: This product contains nicotine. Nicotine is an addictive chemical. For ADULT use only.

How to build the coil with the Kumo RDTA tank?

1) Pull and remove the whole top cap;

2) Unfasten the hexagonal screws on the post holes with 1.5 mm Allen Key;

3) Building the coils and place the built coil on the build deck correctly;

4) Tighten the hexagonal screws with 1.5 mm Allen Key. Snip off the coil leads;

  • Connect with mod to activate to test the built coil;

6) Roll each section of cotton to thread through the coil, saturate cotton with e-liquid;

  • Activate the mod to make sure the coil can produce vapor;
  • Put the top cap back into place.

Note: Prebuilt coil and cotton are not included in this package.

How to build the coil with the Kumo RDTA tank