06. Nov. 2023
Before diving deep, let’s talk about why DIY coil building is worth the effort. Building your own coils can:
Starting your coil building journey requires a few essential tools:
|Step 1: Cut and Measure – Start by cutting a piece of your resistance wire. 4-5 inches is a good starting length.|
|Step 2: Wrap the Coil – Using your coil jig, begin wrapping the wire. Depending on your preference, you can go for fewer or more wraps.|
|Step 3: Install the Coil – Once wrapped, insert the ends of the coil into the posts on your RDA/RTA, and secure them in place.|
|Step 4: Check the Resistance – Take a look at the screen to ensure the resistance is within a safe range for your battery.|
|Step 5: Test Fire – Attach your RDA/RTA to your mod, and pulse the fire button. Adjust using your tweezers for even heating.|
|Step 6: Wicking– Once your coil heats evenly, it’s time to wick. Insert cotton through your coil, ensuring it’s snug but not too tight.|
Before diving into the world of coil building and experimenting, there are some prerequisites that are necessary for a smooth and accident-free result.
Coil building can be incredibly rewarding, but safety should always be paramount. Always check the resistance of your builds, and ensure your mod and batteries can handle the load.
Coil Building Tips:
We do not recommend everyone to do DIY coil building. It’s better to opt for official coils. You can explore the suppliers’ coil platform to purchase coils directly.
Coil building is more than just a process; it’s an art form, a journey of discovery, and a route to superior vaping. It’s about crafting the very heartbeat of your vape, ensuring every puff is just how you like it.
So, whether you’re a newbie looking to dive into DIY coils or a seasoned vaper eager to perfect the art, I hope this guide sets you on the path of coil building greatness. Here’s to richer flavours, thicker clouds, and the unrivalled satisfaction of a job well done.
Until next time, keep those coils crisp and your clouds thick.