Aspire K1 Plus Tank - Aspire® Official Site

WARNING: This product contains nicotine. Nicotine is an addictive chemical. For ADULT use only.

Buy Now Wholesale

Aspire K1 Plus Tank

Aspire K1 Plus Tank: Introducing the new Aspire K1 Pus Tank. The K1 Plus tank comes in two versions, a ‘standard’ 2.4 ml tank and a TPD version with a capacity of 1.9ml for TPD regions. The K1 tank also has replaceable 1.8ohm coils and is also compatible with Aspire original BVC coils and Aspire Spryte coils. Both have adjustable airflow and the TPD version also has ‘child resistant’ features top and bottom.

K1 Plus Tank Dimensions

K1 Plus Tank Exploded View

K1 Plus Coil: The K1 plus tank is compatible with aspire original BVC coils( Coils for CE5, ET-S, K1, K2 and Spryte)

K1 Plus Filling: Filling the K1 tank is easy, just three steps. First, push down the drip tip and unscrew to remove it from the tank, then add your preferred e-liquid by pushing the tip of your filling bottle through the filling hole. Finally, put the drip tip back on top of the tank and screw down to secure it. Three simple steps and it’s done. Both have adjustable airflow and the TPD version also has ‘child resistant’ features top and bottom.

K1 Plus Filling (TPD Version): For the child resistant TPD version, it’s almost the same, to remove the drip tip, push down and turn to unscrew and remove the drip tip. When adding e-liquid, by push the tip of your filling bottle through the self-sealing filling hole. Then just reassemble remembering to push down and turn when replacing the drip tip.

Coil Installation(Standard Version): Simply unscrew the base hardware and remove from the tank it. Unscrew the coil and replace. Re-inset the base hardware to the tank and screw in to secure.

Coil Installation(TPD Version): The TPD version is child resistant and the coil replacement steps are a little different. Invert the tank, push down the base hardware and unscrew to disengage it, then push and unscrew to remove the used coil then push and screw to install a new one. The base hardware is re-installed by pushing down and screwing in to relocate the base hardware. Note: The pressing and twisting operations in each step are performed simultaneously In both types of tan, both the standard and the TPD version, order to avoid dry burning and damage to the coil, please fill the tank before installation.

Kits Contents

Standard Version:

1* K1 Plus tank / 1* 1.8Ω nichrome coil / 1* User Manual

TPD Version:

1* K1 Plus tank / 1* 1.8Ω nichrome coil / 1* User Manual

About Us

Support

Where to buy

New Verification System

Aspire Product verification

Aspire new anti-counterfeit

Old Verification System

Aspire Product verification